Stadium Lighting Contractors 1200W LED High Mast Floodlight 150LM/W DALI Dimmable IP66

• Dual Beam Channels: Two aimed optic chambers let crews project a narrow competition beam and a wide skirt beam from a single housing, trimming fixture counts by up to twenty percent.
• Flicker-Free Broadcast Output: Driver ripple is held under one percent at all dimming levels, so super slow-motion replays stay clean on 1000 frame-per-second cameras.
• DALI-2 and DMX Control: Native support for DALI-2, DMX512 and 0-10V means the venue can run competition, training and cleaning scenes from the existing control desk.
• Rear Aiming Scale: Engraved angle scale and lockable collar allow accurate re-aiming after a mast service visit without re-running a photometric survey.
• Heavy-Duty Housing: Pressure die-cast body with 4mm mounting ribs carries wind load ratings suitable for 30-metre masts in coastal and typhoon regions.
• 20kV Surge Protection: Integrated surge device removes the need for separate pole-top arrestors on exposed mast installations.
• Fast Service Swap: Plug-in driver module with coded connectors lets a two-person crew replace electronics at height in under fifteen minutes.

The luminaire is aimed at stadium projects where the lighting design has to satisfy both a competition standard and a broadcaster. Contractors deploy it on main pitch masts, on secondary training fields and on perimeter poles that double as CCTV and public address mounting points. Because the two beam channels are controlled independently, the same fixture covers a full pitch in competition mode and drops to ten percent output on the outer channel for community sessions, which cuts energy use without changing the switching hardware. Retrofits work too: the housing footprint matches common 2000W metal halide floodlight footprints on existing cross arms, so old masts can be reused.

• Football and rugby stadium main pitch masts up to 30 metres
• Televised venues needing flicker-free dimming scenes
• Multi-use community stadiums with night hire programmes
• Metal halide retrofit projects where masts are retained

Fixtures ship in twin-wall export cartons with the optic chambers locked in a transport jig, two units per carton for economical container fill. Mounting hardware, aiming templates and the control wiring diagram are packed in a labelled accessory box. Production runs include a 72-hour burn-in, isolation testing, lumen sampling and a control protocol report per order. Compliance files cover CE, RoHS, FCC, PSE, UL-recognised drivers and ISO 9001 manufacturing. Spare driver modules, gaskets and optic lenses are stocked for the warranty term, and commissioning support is available remotely for DMX address planning.